Some of the same billionaires who pioneered the commercialization of space are now using their fortunes to fund companies to create the energy source of the stars on earth. And a new round of funding is sending MIT spin-off Commonwealth Fusion Systems into orbit.
The start-up company just closed on a $1.8 billion funding round making it the largest in Massachusetts history. Among the backers were billionaire Bill Gates, George Soros and venture capitalist John Doerr.
Commonwealth Fusion predicts it will have the world’s first net-energy fusion device by 2025 and is already building a factory in Devens to make the machine.
Work is in high gear as Richard Holcomb, director of construction and facilities, walks the 47 acre site in Devens.
“Careful,” he says, stepping over a just poured foundation wall.
Holcomb has worked on a lot of big projects, but he’s never built anything like this. The concrete walls? They’re 8 feet thick.
“All of it screamed at me like … wow, this is going to be amazing,” Holcomb says. “So if there was an opportunity I had to be a part of it.”
Holcomb works for Cambridge-based Commonwealth Fusion Systems. The campus he’s building will be home to a factory producing devices that do what the stars do: convert mass into energy.
The first two buildings at Devens will house the company’s headquarters and magnet manufacturing operation.
The second building will be home to its SPARC device, designed to be the world’s first net-positive fusion machine. It’s a half-size prototype of a commercial device the company predicts will generate low cost, carbon-free electricity to the grid.
SPARC uses hydrogen, the most abundant element in the universe. With one proton, one electron and no neutrons, it’s the simplest element found in the universe.
But fusing atoms isn’t easy and harnessing the power released from the process has eluded scientists for 70 years. But now, using a variety of technologies, they are closer than ever to making a fusion device that can produce more energy than it took to start the reaction.
An MIT breakthrough and spinoff
The technology behind SPARC was created and tested in a cavernous lab on the campus of MIT in a building that was once a Nabisco cookie warehouse.
“We needed to be a fairly large room because we built the world’s largest fusion magnet in this room,” says Bob Mumgaard, CEO and founder of Commonwealth Fusion Systems. Mumgaard got his Ph.D at MIT’s Plasma Science and Fusion Center.
The research center and Mumgaard’s company are collaborating to build a device that replicates on earth what intense gravity does in the center of stars. In stars, gravity compresses and heats hydrogen atoms into a plasma. The super hot conditions rip the atoms apart, releasing their protons and electrons, which under the intense stellar gravity, fuse together creating a tiny amount of helium and a huge amount of energy. Think the stuff that is used in balloons and Einstein’s famous equation: E=MC2. Energy equals Mass times the speed of light (186,000 miles a second) squared. That’s a lot of energy from a small amount of mass.
Theoretically, a fusion reactor fueled with a quart of hydrogen derived from seawater could heat 10,000 homes for a year. It’s estimated that just 70 tons of hydrogren in a fusion plant could replace the energy produced by all of India’s coal power plants.
The key to making fusion working on earth is controlling the super-hot hydrogen plasma in a device known as a tokamac, a bagel-shaped machine that uses super-powerful magnets to compress the plasma.
An effort by 35 nations has spent more than $20 billion building an experimental tokamac in the south of France. Known as ITER, it will weigh four times as much as the Eiffel Tower, but is not designed to produce net energy. It’s a research device.
Building a better bagel magnet
Commonwealth Fusion Systems took different approach.
“You basically have to put a sun in a bottle,” says Mumgaard, “It turns out, if you build a magnetic bottle that can actually hold the fuel at the same conditions stars get to, you can create and sustain fusion.”
The philosophy at Commonwealth Fusion Systems is that, by building a smaller device, they can make commercially fusion plants sooner and cheaper. SPARC will be just 1/40th the size ITER.
The critical component MIT and Commonwealth Fusion built was the world’s most powerful superconducting magnet. It’s encased in a stainless steel vacuum chamber, surrounded by tanks of liquid nitrogen.
“Buried inside there,” says Mumgaard, “is a magnet that’s 10 tons, about 10 feet tall and it has the distinction of being made out of a material that allows it to go to a very high magnetic field.”
The material is called high temperature superconducting wire. Actually, it’s flat like a ribbon and the company is the largest buyer of the material in the world.
In a recent test, the new magnet was 400,000 times stronger than the earth’s magnetic field. Seven peer-reviewed research papers found if you could build magnets this powerful, it should be possible to build a working tokamac that produces net energy.
When you’re hot you’re hot. When you’re not you’re not.
“So the magnets will operate at 20 kelvin, roughly minus 400 degrees Fahrenheit,” says Joy Dunn, head of operations for the company. That’s relatively warm by superconducting standards. At this temperature the superconducting wires lose all resistance to the flow of electrons. This enables the magnets to compress the plasma to superhot temperatures and pressure, creating the conditions to make fusion energy inside the tokamac.
“On the other side of the wall of the vacuum vessel, we’re operating the plasma at about 100 million degrees celsius, so it’s going to be largest thermal gradient in the world in just a matter of inches,” Dunn says.
Inside the tokamak, the plasma fuel will be five times hotter than the center of the sun. But it’s delicate, so there’s nothing to be afraid of, says Mumgaard.
“Some people think of fusion as like lava … you know, hot like lava … but that’s actually not what it is,” he says. “It’s actually closer like a candle in the wind.”
The conditions to make fusion in a tokamak are so difficult to create and sustain, which makes the devices inherently safe, says Mumgaard. They can’t melt down.
“If you think about it, stars are out in space, they don’t touch anything,” he says. “And that’s what you have to basically build in a fusion machine. And the minute it touches something, it doesn’t melt through like lava. It extinguishes like a flame.”
Five years ago a tokamak at MIT’s Plasma Science and Fusion Center produced, for a few milliseconds, the intense pressure and temperature needed to make fusion. The Center’s director, Dennis Whyte, says the magnets used in that device, were made with ordinary copper wire.
“And when that turned on to produce that confining magnetic field, it consumed over 200 million watts of electrical power,” he says. “So you say, ‘Well, what a great scientific achievement; hotter than the center of the sun’ … but it’s hard to imagine it as a practical power source because you’re using so much electricity to generate the magnetic field.”
But the new high temperature superconducting magnet, like those that will be used in Commonwealth Fusion’s SPARC device, will consume just 20 watts,1/10,000,000th the amount of energy as the copper wire magnets. It means far lower costs to operate the company’s device, making commercial fusion financially feasible.
“The idea is you get one major disruptive technological breakthrough and it speeds everything else up,” Whyte says. “But the technology didn’t exist until it did a few weeks ago … here.”
MIT and Commonwealth Fusion Systems have formed a unique corporate-academic collaboration. They share a common agenda — making fusion energy viable — but have separate agendas. The company wants to make money; the University wants discoveries about the fundamental energy that powers the universe.
“Fusion is the greatest technological challenge that I think humanity has ever undertaken,” says British plasma physicist Arthur Turrell. In his new book, “The Star Builders and The Race to Power the Planet,” he says we are closer than ever in achieving net energy from fusion devices and credits the emergence of private sector funding. “It’s not really about time,” he said in a recent interview. “It’s about the investment that we’re putting into it as a society and the kind of priority that we give it and the number of people who are working on it.”
The race to make commercial fusion heats up
There are about two dozen companies competing to produce fusion energy devices, promising unlimited safe power, free of carbon emissions.
Helion in Everett, Washington is backed by tech billionaire Peter Theil. Jeff Bezos is behind General Fusion in British Columbia, Canada, and Bill Gates has invested in Commonwealth Fusion Systems, which will have 300 workers when the Devens is
Mumgaard predicts that, by 2025, SPARC will produce ten times more energy than it consumes, and the company will have a commercial fusion device, capable of powering a town, in the early 2030s. He says the company will be selling them around the world.
“If you look at what needs to be done for climate, to keep the planet in a livable range, we will not be able to build these things fast enough,” he says.
It’s a hopeful story, says Mumgaard. One that is unfolding in Devens, 35 miles west of MIT and 93 million miles from the sun.
This article was originally published on WBUR.org.
Copyright 2021 WBUR